19/03/2024

Innovative cable jointing for reliable cable connections

With RELICON cable jointing you're ready for anything:


cable jointing: Relicon i-joint cable jointing: Relicon i-joint


RELICON cable jointing is suitable for universal application as branch or straight through joints in low-voltage electrical installations. They are the product of choice of energy supply companies, industry and the electrical trade for permanently connecting cables buried in the ground.

Cable jointing is an indispensable tool for electrical engineers, and high expectations are placed on it. A cable joint is intended to protect cables against moisture ingress, dust and penetration by foreign objects.

RELICON cable jointing is longitudinally and laterally waterproof. The cable joints are available in various sizes as straight through i-Line joints and also as Y-Line and T-Line branch joints or PA parallel branch joints. They can be used underground, under water or in installation ducts for indoor or outdoor applications, for example for connecting buildings to the mains supply.

RELICON cable jointing is equally resistant to all environmental influences and are environmentally friendly. HellermanTyton also offers Polyurethane and Epoxy-based Resins  (e.g. PUR 33 cast resin and Epoxy Resin EP 64 ) in its product range.

Processing of cast resin with our SF-Technology is high-quality, safe and reliable.

Relicon save filling system bag

Thanks to our optimised "Safe Filling" (SF) system, the installer is protected from coming into contact with the cast resin whilst the cast resin is mixed and the joint sleeve is filled. This means that working with RELICON resin cable jointing kits is always a safe, clean and efficient process.

The transparent cast resin bag is connected to the moulding sleeve by means of a filler pipe and an adapter so that the cast resin mixture can be poured easily. The excellent flow properties of our cast resins make filling simple and the transparent material used for the cable jointing sleeve shells guarantees optimum visual monitoring of the filling process at all times.

A ring in each cast resin bag makes it easy to position and connection the special SF filler pipe. After the filler pipe is securely attached to the mixture bag with an adapter ring, the filler pipe can be inserted firmly into the opening of the upper joint shell.


RELICON Safe filling technology RELICON Safe filling technology


Step 1: Transparent two-chamber pouch for a optimized visual inspection of the mixing process.
Step 2: The middle cold seal between the resin and harder component opens by means of pressure.
Step 3: Simple mixing of the two components.


RELICON Safe filling technology RELICON Safe filling technology


Step 4: The patented color change gives the correct mixing process.
Step 5: The filling nozzle in combination with the adapter makes filling the joint very easy and efficient.
Step 6: Automatic and leakproof opening of the pouch through installation of the filling nozzle.

The right cable jointing for your application

Straight-through joints low voltage

cable jointing: Relicon i-joint family

RELICON i-Line straight-through joints are made for installations in low-voltage electrical networks. This cable jointing is suitable for jointing on polymeric cables and wires made of PVC, XLPE, PE, EPR and utility cables.
Application: Connections in industrial buildings, power supply in the ground, outdoors and in the water.

Flexible straight-through joints low voltage

Cable Jointing Relicon F-Line

The flexible RELICON F-Line cable jointing for low voltage applications can be used to repair and connect flexible cables made of PVC, PUR, EPR like H05RR-F, H07RN-F, etc.
Application: Cable drum, underground, submerged, outdoor, indoor and wiring ducts.

Branch joints low voltage

RELICON branch cable joints T-Line and Y-Line

RELICON branch cable joints T-Line and Y-Line are made for installations in low-voltage electrical networks. These resin cable jointing kits are suitable for jointing on polymeric cables and wires made of PVC, XLPE, PE, EPR and utility cables. Application: connections in industrial buildings, power supply in the ground, outdoors and in the water.

Parallel branch joints PA

Cable jointing Relicon branch joint PA

PA-11 58/230, PA-12 75/300 and PA-13 95/420 are universal straight-through and branch cable jointings available with either cast resin Reliflex (no hazardous labeling) or cast resin PUR 33. Depending on the connector they can be used for single- and double branch-off. They are suitable for jointing on polymeric cables and wires made of  PVC, XLPE, PE, EPR and utility cables. Application: In low-voltage electrical networks as well as for signal and communication cables; for power supply lines for outdoor lighting and for cable repairs; underground, submerged, outdoor, indoor and wiring ducts.

Parallel branch joint house connections PAH

Straight-through joint Relicon PAH

PAH-1 120/290, PAH-2 130/300, PAH-3 135/360 and PAH-4 140/420 are universal straight-through and branch cable jointings. PAH-2, PAH-3 and PAH-4 are available with either cast resin Reliflex (no hazardous labeling) or cast resin PUR 33. They are suitable as single branch joints with commercial branch clamping rings for polymeric cables and wires made of PVC, XLPE, PE, EPR and utility cables. Application: In low-voltage electrical networks as branch joint for building connections; underground, submerged, outdoor, indoor.

RELICON expertise for cast resins for low and medium voltage:

Two-component polyurethane cast RELICON PUR 33 ​​​​​​​(low voltage )

Cast resin Relicon PUR 33

The RELICON PUR 33 cast resin for cable jointing has been created for the electrical insulation and mechanical protection of cable connections in low-voltage electrical networks. Also suitable as mechanical and moisture protection on medium-voltage cable connections. Application: for indoor and outdoor use.

Two-component polyurethane cast resin RELICON PUR 66 (medium voltage)

Relicon PUR 66 2-component PUR cast resin

The RELICON PUR 66 cast resin for cable jointings has been created for the electrical insulation and mechanical protection of cable connections in mediumvoltage
electrical networks. Application: for indoor and outdoor use.

Two-component cast resin flexible RELICON PUR 44 Flex (low voltage )

Cast resin Relicon PUR 44 Flex 2-component PUR cast resin flexible low voltage

The RELICON PUR 44 Flex cast resin has been created for electrical insulation, mechanical protection and repair of flexible cable connections for the low-voltage range.
Application: for indoor and outdoor use.

Two-component epoxy resin RELICON EP 64 (low- and medium-voltage )

Epoxy cast resin Relicon EP 64

The RELICON EP 64 epoxy cast resin for cable jointing has been created for use in electrical installations as well as in the chemical and oil refining industry for the low- and medium-voltage range. Application: for indoor and outdoor use.

Two-component epoxy resin RELICON EP 20 (low- and medium-voltage )

Epoxy cast resin Relicon EP 20

The RELICON EP 20 epoxy resin has been created for use in low- and medium-voltage electrical networks. It is cold curing, highly impactresistant and the low exothermic reaction makes it possible to cast even larger volumes. Application: for indoor and outdoor use.

Two-component cold casting compound RELICON Reliflex (low-voltage)

Relicon Reliflex 2-component cold casting compound

The RELICON Reliflex cast resin is a non-toxic (no hazardous labeling) cold casting compound based on hydrocarbon resins for the low-voltage electrical networks. The very hydrophobic resin has been created for electrical insulation and moisture protection of cable connections. After curing, Reliflex is extremely resistant to moisture and has excellent insulating properties. Application: for indoor and outdoor use.

Two-component polyurethane sealing mastic RELICON PUR DS

Relicon PUR DS 2-component polyurethane

The RELICON PUR DS  polyurethane resin for cable jointing is a chemical thixotropic, universal two-component polyurethane sealing mastic. The sealing mastic is ideal for sealing wall feed-throughs as well as other filling and sealing applications.