Samplepack for Photovoltaic products

Here you can find some information about the products in your photovoltaic samplepack.
If you want to have more detailed information about the single product, please click on the type name.

Q-Series: An innovative open head design makes this new Q-tie a revolutionary product for bundling and fixing cables. With conventional cable ties, the end of the strap must be threaded through the head of the tie. Once that is done, it is necessary to grasp the tie again in order to pull it tight. The new Q-tie has consigned these two steps to the past. Simply insert the ergonomically shaped end of the strap into the open head tie and pull it tight. The tie is ready. Furthermore, this tie can be pre-locked and opened again should more cable need to be bundled. It offers greater security in roof installations because it simplifies the work process and saves up to 25% of working time compared to conventional cable ties.

Q-Serie

Typ: Q50R-W    Art.Nr.: 109-00076

4,7x210mm, made of UV stabilized material.

 

Typ: Q50I-W     Art.Nr.: 109-00078

4,7x290mm, made of UV stabilized material.

 

Typ: Q120I-W   Art.Nr.: 109-00082

7,7x300mm, made of UV stabilized material.

T-Series: Our cable ties in the T-Series are made of UV stabilized material and ensure easy and secure fixing of cables to assembly frames. UV stabilisation makes the T-Series an optimum solution for photovoltaic installations.
T-Serie

 

Typ: T30LL-W   Art.Nr.: 111-03570

3,5x290mm, made of UV stabilized material.

 

Typ: T80R-W     Art.Nr.: 111-05060

4,7x210mm, made of UV stabilized material.

 

Typ: T80I-W      Art.Nr.: 111-08290

4,7x300mm, made of UV stabilized material.

MBT-Series: These stainless steel cable ties are corrosion resistant and can withstand chemical influences such as acids and salt water, as well as extremely high temperatures.
MBT-Series

 

Typ: MBT14S    Art.Nr.: 111-93149

 

The MTB series of ties has an unreleasable locking system. The ball locking system allows extremely high holding forces. MTB ties are used especially in extreme situations such as where concentrated solar power or concentrated photovoltaics occur.

EdgeClip-Family: The EdgeClip family of fasteners has been developed for assembling and bundling cables or wires on an edge. Solar cables are assembled with the pre-mounted UV-resistent ties EC4A-W and EC4B-W on the top edge of the module or frame. With the EC5A-W and EC5B-W ties on the side edge of the module or frame. This cable assembly position is above all used for module frames angled inwards. This innovative EdgeClips are simply pressed by hand onto an aluminium module edge of 1-3mm. According to individual need, the ties can be removed from the base and threaded back in at a 90°angle, allowing easy control over the direction of the assembly with just one component. 
EdgeClip Family

Typ: T50ROSEC4A-W    Art.Nr.: 156-00570 

Typ: T50ROSEC4B-W    Art.Nr.: 156-01154 

Typ: T50ROSEC5A-W    Art.Nr.: 156-00661 

Typ: T50ROSEC5B-W    Art.Nr.: 156-00698

 

Typ: T50ROSEC23-W    Art.Nr.: 156-00843 

This innovative EdgeClip from the EC23 product series is simply pressed by hand onto a PV aluminium module edge of 3-6mm

The EdgeClip family of fasteners has been developed for assembling and bundling cables or wires on an edge. This innovative EdgeClip from the Q50REC4A, Q50REC4B, Q50REC5A and the Q50REC5B product series are simply pressed by hand onto a PV aluminium module edge of 1-3mm. Solar cables are assembled quickly and securely on the top edge with the UV-resistent pre-mounted tie of the revolutionary Q-series, saving up to 25% working time.

EdgeClip Family

 

Typ: Q50REC4A-W    Art.Nr.: 156-01085

 

Typ: Q50REC4B-W    Art.Nr.: 156-01086

 

Typ: Q50REC5A-W    Art.Nr.: 156-01087

 

Typ: Q50REC5B-W    Art.Nr.: 156-01088

 

MSC2: This innovative EdgeClip made of stainless steel has been developed for highly demanding applications where plastic fasteners are not preferred, such as in solar parks in desert areas or applications close to salt-water environments

EdgeClip Family

Typ: MSC2    Art.Nr.: 151-00982

The corrosion resistant MSC2 can be easily installed by hand onto the frames of a solar module or a 1-3mm solar frame edge made of aluminium or galvanised steel. The retaining claws are dual-sided and ensure secure retention from both sides of the edge. The cable supports are specially rounded so that the solar cable cannot be damaged. The clip can support one or two solar cables in standard diameters of 4-10mm² parallel to the edge.

Clips and Mounts:

CL8-W

 

 

Typ: CL8-W                      Art.Nr.: 151-26860

Simple assembly of PV cables with a screw base for M6 screws in aluminium, galvanised steel or wood. Corresponding cable fasteners of up to 8mm in width allow the solar cables to be tied. This base is especially suitable for frames with a large profile and smooth outer surface.

HC2x7.3AH13

 

Typ: HC2x7.3AH13-PV    Art.Nr.: 151-00899

 

This clever fastening clip has a swivel head and is suitable for solar cable of 4 -10mm². The base has two assembly positions adapted to the geometry of Haticon and Renusol screw channels.

KR6G5-W

 

 

 

Typ: KR6G5-W    Art.Nr.: 151-24660

Simple assembly of PV cables with a screw base in aluminium, galvanised steel or wood. Corresponding cable fasteners of up to 6mm in width allow the solar cables to be tied. This base is especially suitable for frames with a large profile and smooth outer surface.

SC6.6-W

 

 

Typ: SC6.6-W      Art.Nr.: 151-00927

Innovative retainer clip for holes with a 6,5mm diameter. Standard PV cable of 4-6mm² in diameter can be clipped in.

Stay in touch with us!


Update: 12/11/2017 © HellermannTyton 2017
Contact